Compact constant temperature controllers ACD10
Compact constant temperature controllers ACD10

🔍
Compact constant temperature controllers ACD10

Compact constant temperature controllers ACD10

ACD compact controllers are designed to control a constant temperature in the pipeline. The controller is set using a keypad and a graphic display, which is also used to show measured temperatures and other data. An integrated motor drive is used to control the mixing valve. The controller shall be connected to the power supply by means of a prewired cable with plug.

Read > Why is the heating controller an important part of the heating system?

Add to enquiry
ACD manual operation coupling

Clutch for manual operation

The manual operation clutch of the ACD is activated by pressing a button (marked in the picture). When the clutch is activated, the control of the mixing valve and, if necessary, of the circulating pump is deactivated, thus saving energy.

ACD quick installation

Quick assembly

The innovative accessories and mounting system allow the ACD Compact Controller to be quickly mounted and dismounted on the mixing valve, largely without the need for tools. Accessories are available for most mixing valves on the market.

ACD setting keys

Setting keys

The keys for adjusting the regulator are located below the manual scroll button.
This prevents unwanted access to the controller settings.

ACD plug-in connectors

Plug-in connectors

The compact ACD has a socket built into the housing for plugging in the power cord. This allows easy replacement of the cable in case of damage.

ACD graphic display

Graphic display

The 240 x 240 pixel colour graphic display provides detailed graphics and text in colour.

Use

  • Temperature control of the return water to the boiler or other energy source.
  • Constant temperature control of the inlet to the heating or cooling system.

Capabilities

  • 2 preset hydraulic schemes.
  • Display of temperatures and other operating data.
  • Heating or cooling mode.
  • Display of notifications and warnings about the operation of the heating system.
  • Setting and signalling the direction of rotation of the mixing valve.
  • Setting the control sensitivity (PID).
  • Can be mounted on different types of mixing valves.
  • Click-to-install system.
  • Automatic screen orientation.
Technical dataACD10
TFT displayYes
KeyboardYes
Own consumptionMaximum 3,5 W
Standby power consumptionMaximum 0,25 W
Torque6 Nm
Angle of rotation90 < °
Rotation speed2 min 90 < °
Control of the mixing valve3-point PID
Connection voltage230 V ~, 50 Hz
Maximum own consumption5 W
Clock power supplyBattery CR1025 (Li-Mn) 3 V
Watch accuracy+/-1 s (24 h) at 20 °C
Degree of protectionIP42 after 60529
Safety classI according to EN 60730-1
Type of temperature sensorsPt1000
Housing materialPC - dark grey
Operating temperature0÷50 °C
Storage temperature-20÷65 °C
Product weight900 g
Number of pieces per packing unit24 pieces
Dimensions
Electrical connection
Lead Form Test
Step 1 of 5

WANT ADVICE OR A QUOTE?

Here you can ask questions about heating and cooling products or make an enquiry for your project. If you already have technical documents, plans or additional information about your project, you will be able to add them in later steps.

Related products

Home Phone Email Scroll Top

NOTICE

The Seltron service will be closed from 27 December to 29 December 2023.
Any emergencies or issues that arise during our absence will be dealt with as soon as the service reopens on 3 January 2024.
Thank you for your understanding.

Opening hours of the Seltron store on 30 December 2023.
  • from 7.00 to 12.00