Why heat your domestic water with a SELTRON SAN heat pump?
The SAN heat pump provides extremely efficient and economical heating of domestic hot water, as it has an integrated capillary exchanger with a high contact surface with the hot water storage tank. It achieves a COP of 3.7 and is one of the most efficient on the market.The integrated differential regulator and the additional heat exchanger allow the heating of domestic hot water using an additional source (boiler or solar system). The user can independently select the source of domestic hot water heating according to availability and affordability. The SAN heat pump is energy class A+.
Innovative cold water refilling system
A desalination system with directional cold water flow provides the user with up to 20 % more available hot water heated to the desired temperature. As a consequence, the deslagging system also reduces the number of times the heat pump is switched on and off, thus ensuring a longer lifetime of both the compressor and the heat pump as a whole.
Integrated INNOVATIVE SELTRON SAN heat pump stratification system
The cold water enters the storage tank through a desalter so that it does not mix with the hot water already prepared.
CLASSIC STORAGE FILLING SYSTEM
The cold water enters the storage tank and mixes with the already prepared hot water. This causes the total volume of sanitary water to cool down and therefore the heat pump to switch on more frequently.
Possibility to heat sanitary water with an additional source
The heat pump has a built-in heat exchanger, which allows the heating of the domestic hot water with an additional source, such as a boiler or a solar system. If you want to heat the water more quickly or do not have an additional source, you can also heat the water in less favourable temperature conditions with the built-in 1,5 kW electric heater.
Touch control
The heat pump is controlled by a touch-sensitive controller for efficient and reliable operation. The backlit display provides clear information on the temperature of the sanitary water and the status of the appliance and further complements the modern design of the heat pump.
Intake of outside air
If you are installing a heat pump in a small room where there is not enough air volume for the unit to operate efficiently, you can also bring in air from outside or from an adjacent room.
Ready to harness electricity from the sun
If you have a solar electricity system, the SAN heat pump has a "PV" function to use the energy generated for heating.
Elegant design
The SAN heat pump's modern, sleek design and construction allows it to be placed in any room of your home.
Possibility to heat sanitary water with an additional source
The heat pump has a built-in heat exchanger, which allows the heating of the domestic hot water with an additional source, such as a boiler or a solar system. If you want to heat the water more quickly or do not have an additional source, you can also heat the water in less favourable temperature conditions with the built-in 1,5 kW electric heater.
Maximum safe and economical operation
The heat exchanger of the heat pump for heating the sanitary water is located on the outside of the heater and is not in direct contact with the sanitary water. The advantage of this design is that it is completely protected against possible mixing of the sanitary water and the refrigerant. The heat exchanger, with its increased transfer surface, further contributes to the efficiency of the heat pump. The result is maximum safe and economical operation.
