Vogelundnoot logo

ULOW E2 radiators for heat pumps

The simplest solution to renovate your heating system.

  • Efficient heating and cooling
  • Easy control with wireless thermostat
  • Rapid reaction, e.g. after winter ventilation
  • Dry comfortable cooling without condensation
  • Fits many existing connections
Switching to heat pump heating

Switching to heat pump heating without complications

Replacing an old oil boiler with a modern, clean and economical heat pump can be done in a few working days by a heating expert. Replacing old radiators with innovative E2 low-temperature radiators for a heat pump can even be done in a single day. If you already have an electrical connection near the radiators, the modernisation of your living space can be completed quickly and you will have a completely new living experience.

Easy and quick replacement of old radiators

The invaluable advantage of renovating your heating with an E2 radiator is that your current floor remains completely untouched. They don't have to be removed and replaced with new ones, as happens when installing other heating systems - saving you cost and time, and avoiding annoying dust when renovating.

Radiator E2: Cutting-edge technology for ecological heating and unrivalled comfort

Climate-friendly technology and design from Austria: the E2 heat pump radiator combines absolute heat pump compatibility with unprecedented comfort.

100% compatibility with heat pumps

Heat pumps operate at temperatures of 35 to 40 °C, at which previously only underfloor heating systems could operate. Thanks to its ingenious design with superior fin geometry and on-demand ventilation, the E2 radiator offers for the first time full compatibility with a heat pump, which is revolutionary for heating renovation.

Vogel Not radiator e2 for heat pumps

Faster, quieter and more comfortable heating

Discover the universal performance of E2 radiators: improve the comfort and efficiency of your home:

  • Precise regulation as requirements change.
  • Fast response times, e.g. after winter ventilation.
  • Faster reaction than underfloor heating.
  • A pleasant mix of radiant and convective heat.
  • High living comfort and an increase in the value of your property.
  • Dry comfortable cooling without condensation.

Smart heating and cooling

Behind the aesthetic surface of the E2 radiator is a wealth of innovative technology for your well-being.

  • Automatic, electronic drive.
  • Precise control via wireless thermostat.
  • a two-way valve for optimum cooling (note: a two-way flow valve must also be used for the side connection and is not included in the scope of supply).
  • Dry comfortable cooling without condensation.

Dry comfortable cooling

The two-way valve ensures more efficient cooling without condensation.
In the cooling mode, appropriate adjustments to the system are required to ensure, among other things, that the refrigerant temperature is above the dew point temperature of the room air (dry cooling).

Dry comfort cooling with e2 radiator
More comfort with the e2 radiator

E2 radiator with wireless thermostat for fast heating and cooling

The new temperature control is done with a simple room thermostat. Thanks to the automatic drive and the wireless room thermostat, the E2 radiator starts heating or cooling immediately.

Many connection options for the E2 radiator

Whether it's a new or old connection - the E2 radiator is flexible enough to fit many existing connections.

Replacing an old radiator with two connections on the right side

Connection on the right side of the e2 radiatorConnector on the right side of a conventional radiator

Replacing an old radiator with two connections on the left side

Connector on the left side of the e2 radiatorConnector on the left side of an old radiator

Replacement of an old radiator with inlet right and return left connections

Connector on the right and left side of the e2 radiatorConnector on the right and left side of the old radiator

Replacement of an old radiator with inlet left and return right connections

Connector on the left and right side of the e2 radiatorConnector on the left and right side of the old radiator

Replacement of an old radiator with two lower connections on the right inlet and left return side

Connector on the bottom right and left of the e2 radiatorConnector at the bottom right and left of the old radiator

Video presentation of the E2 radiator

Imagine a radiator that impresses not only with its aesthetics, but also with its advanced, environmentally friendly technology. It is 100 % heat pump compatible and ideal for modern heating systems. The E2 radiator from Vogel & Noot combines innovative design with optimum fin geometry and advanced, automatically regulating fans. This innovation in the world of heating systems enables efficient heating and cooling. With the E2 radiator, you will enjoy warmth in winter and freshness in summer, as its technology ensures a pleasant room climate. You can easily control the temperature wirelessly with the radio wave-based room thermostat. With the automatic adjustment mechanism, heating or cooling starts immediately and replacing old radiators is quick, clean and efficient. The E2 radiator adapts to many existing installations, making it easy to renovate your heating system. With the E2 radiator from Vogel & Noot, heating renovation has become easier than ever.

Presentation brochure

Discover the E2 radiator from Vogel & Noot, which combines aesthetics with environmentally friendly technology.  
Vogel and noot heat pump radiators presentation

Download

Send your enquiry

NOTICE

The Seltron service will be closed from 27 December to 29 December 2023.
Any emergencies or issues that arise during our absence will be dealt with as soon as the service reopens on 3 January 2024.
Thank you for your understanding.

Opening hours of the Seltron store on 30 December 2023.
  • from 7.00 to 12.00