O.ERRE GHOST 160 ventilation unit
- CHOOSE THE BEST
- Efficient ventilation
- Clean and fresh air
- Prevents mould and bacteria
- Quiet operation
- Subsidy ECO FOLDER
O.ERRE GHOST 160 ventilation unit
- CHOOSE THE BEST
- Efficient ventilation
- Clean and fresh air
- Prevents mould and bacteria
- Quiet operation
- Subsidy ECO FOLDER
Efficient ventilation
Local ventilation GHOST 160 is the perfect solution for ensuring adequate ventilation in residential and commercial premises, during renovations and in all cases where ducted ventilation systems cannot be used for space reasons.
The GHOST 160 features a modern and elegant design and easy installation.
Its design makes it perfectly adaptable to any space and it can be quickly installed in 160 mm diameter round ducts.
The O.ERRE GHOST 160 provides adequate ventilation even in large rooms, with air flows of up to 60 m for exhausting and re-inflating air.3/h.
The AC airflow system ensures constant indoor air quality.
Benefits
- EASY MAINTENANCE
When removing the unit, it is not necessary to interfere with the electrical connection of the appliance.
- IMPROVED EFFICIENCY
The longer ceramic heat exchanger of 150 mm ensures better efficiency.
- QUIET OPERATION
The outer grille is designed to improve airflow and reduce external noise.
The electric motor housing is located in the wall behind the heat exchanger.
Implementations
The O.ERRE GHOST 160 is available in two versions.
GHOST 160 ACTIVE
GHOST 160 WIRELESS
Wired connection between units
Wireless connection between units
- Remote control with display.
- Integrated humidity and light sensors for more automatic functions.
- By simply setting the DIP switches, up to 16 units can be configured to communicate sequentially in the same system in master/slave mode.
- 3 adjustable speeds (plus night mode).
Energy label
O.ERRE GHOST 160
- FRESH AIR
Fresh air from the surroundings passes through the heat exchanger for 70 seconds, is heated there and is then fed into the room as fresh air. The cycle of exhausting hot and stale air from the room to the surroundings is then reactivated.
- BECOME AIR
The fan exhausts hot and stale air into the surroundings for 70 seconds.
The principle of decentralised ventilation
Capacities of GHOST 160
- Easy and quick maintenance. No need to interfere with the electrical connection when removing the unit.
- The longer ceramic heat exchanger of 150 mm ensures better efficiency.
- Quiet operation. The outer grille is designed to provide better airflow and reduce external noise.
- The electric motor housing is located in the wall behind the heat exchanger.
- Remote control with display.
- Integrated humidity and light sensors for more automatic functions.
- By simply setting the DIP switches, up to 16 units can be configured to communicate sequentially in the same system in master/slave mode.
- 3 adjustable speeds (plus night mode).
- ABS front cover.
- Tilt system to open the front panel to prevent air intrusion when the fan is switched off.
- Standard channel length 500mm. A 700 mm channel length is also available on request.
- Minimum wall thickness 250mm - maximum wall thickness 3 m (2.5 m in case of 90O elbow). DC electric motor rotor with ball bearing for long life and low energy consumption.
- Double dust filter with washable and easy access to the filter itself. Protection class IPX4.
- LED indicator light for displaying filter functions and cleaning.
- Moisture and light sensors.
- The last set function is stored and automatically switches back on after a power cut.
- Pipe covers for on-site installation.
- No condensate drainage is required.
- EcoFund subsidy.
Remote control display
- CONTROL MODE
The unit is in sleep mode, with the sensors remaining active. If the ambient humidity is detected to be higher than the set value, the product will automatically switch on and operate until the set value is reached.
- CAR MODE
Automatic operation with heat recovery using humidity and light sensors.
- MANUAL MODE
Heat recovery mode at manually set speed (sensors off).
- NIGHT FUNCTION
It minimises flow and loudness in night-time operation.
- FLOW FUNCTION
Allows you to select the direction of the air flow.
- BOOST FUNCTION
It allows the air to be exhausted from the room at maximum speed for a certain period of time.
- FILTER RESET
After 3000 hours of operation, regular maintenance of the unit (cleaning of the filter) must be carried out. After the maintenance work has been carried out, normal operation can be resumed by pressing the same key.
- AIR VELOCITY
3 levels: 60 m3/h,
40 m3/h,
20 m3/h.
- HUMIDITY CONTROL
3 levels: 90 %, 60 %, 40 %.
O.ERRE GHOST 160 ventilation unit - video presentation
ASK US
For further information, please contact our freephone number for Slovenian region only.
